Running low tire pressures often leads to a rolled tire off its bead. This situation can be dangerous or in the very least a time consuming repair. Now, with the awesome energy of a Power Tank you can reseat a tire on a rim safely and quickly without removing the wheel from the vehicle. Just jack the wheel up and give it a blast of air. You can be back in business in five minutes. DO NOT USE ETHER.

System Recommendation Chart - A general guide to help make the right choice.*

	29" - 35" Tires	36" and larger tires	Up to 33" Tires + Air Tool Use	35" and larger tires Air Tool Use	35" and larger tires  Air Tool Use but sm. rig like T.J.
POWER TANK™ **
PT-10
PT-15
UPS-10 (2 TANK SYSTEM)
UPS-15 (2 TANK SYSTEM)

LEGEND
	Single mounted tank on vehicle OK.
	For multiple day trips you may consider mounting both tanks or having one at base camp.
	If extra air is needed and you have a mounting location for the larger tank size.

*Intended for overload air bag inflation only.  Not for street rod air bag suspension springs.

**Because of high outlet pressure tool damage is possible and extended tool use is not recommended.  Most air tools are not rated to accept 150 p.s.i.  DO NOT USE with tools that are NOT rated for a maximum pressure of 150 p.s.i.

The “ERS” simply adds the Tire Plug Kit (#TPK-50) and the HD Tire Inflator (TIG-160) to the Power Tank or Power Shot systems.

Airing up tires can be a chore with other methods especially in cold, wet weather. With the Power Tank™, though, airing up tires is quick and easy usually taking less than four minutes to air up all four tires. And a PT-10 will inflate (26) 33"x12.50"x15" tires from 10 to 25 psi. (see charts below).

OK, now what size should I get?
*This chart is meant to be a general guide.  Your other-use requirements should be considered such as air tool use, vehicle size, etc. when choosing your system.

Tire size	PS-10/PT-10	PS-15/PT-15	UPS-10*	UPS-15*
4x4 Truck
up to a 35x12.50	X	X*	X
36x12.50 & Larger	X**	X	X
* - if extended air tool use may be required. ** - if the size of the PT-15/PS-15 is an issue.

AIR UP/ AIR TOOL CHART

We all know the feeling when you hear the snap of metal or the swoosh of a blown side wall. Your heart drops because you know you're in for some work. With a Power Tank™ and a few air tools your trail fixes will be done almost as fast as they were "undone". Here we see Steve replacing a broken knuckle arm.

This "Air Up" Chart illustrates just how amazingly fast a Power Tank™ can inflate your tires and how many it can air up on one tank fill.  What size tire are you running?

AIR UP TIMES and QUANTITY OF TIRE FILLS CHART

	If you inflate your tires from 5 to 15 psi, etc:
2005 PowerTank™ Featuring the NEW SuperFlow™ HPX	5-15 psi 10-20 psi 15-25 psi	Quantity of Tires		5-20 psi 10-25 psi 15-30 psi	Quantity of Tires		5-25 psi 10-30 psi 15-35 psi	Quantity of Tires
What size tires do you have?	Here is your inflation time.	Part #			Part #			Part #
TIRE SIZE:	TIME:	PT-10	PT-15		PT-10	PT-15		PT-10	PT-15
30 x 9.5 x 15	11 sec.	68	102	17 sec.	45	67	23 sec.	34	51
32 x 11.50 x 15	15 sec.	53	80	23 sec.	34	51	29 sec.	27	40
33 x 12.50 x 15	20 sec.	40	60	30 sec.	26	39	40 sec.	20	30
35 x 12.50 x 15	25 sec.	30	45	40 sec.	20	30	50 sec.	16	24
37 x 12.50 x 15	38 sec.	21	30	60 sec.	14	21	75 sec.	10	15
39.50 x 15 x 15	55 sec.	14	21	80 sec.	9	13	110 sec.	7	10
42 x 15 x 15	75 sec.	10	15	115 sec.	7	10	150 sec.	5	7

This "AIR TOOL RUN TIME" Chart shows the amazing run time of various air tools on the different portable Power Tank sizes

AIR TOOL	Typical CFM @ 90 p.s.i.	5 Gal. air tank	POWER TANK		We do not recommend running air tools with our Power Shot due to its high outlet pressure.
			PT-10	PT-15
8/8" Impact Wrench	4.5 cfm	5.5 sec.	6.4 min.	9.6 min.	Make fast work of an axe swap.
1/2" Impact Wrench	7.0 cfm	5 sec.	5.8 min.	8.7 min.	Remove 360 lug nuts with a PT-10!
Air Riveter Gun	4.0 cfm	6.3 sec.	7.1 min.	10.7 min.	Install over 1000 rivets with a PT-10!
1/4" crown stapler	na				Drive up to 1700 staples w/a PT-10!
Nail gun	na				Shoot thousands of brads or nails
3/4" Impact Wrench	9.5 cfm	2.6 sec.	3.0 min.	4.5 min.	Got TRACTOR?
1/4" Air Ratchet	3.0 cfm	8.3 sec.	9.6 min.	14.4 min.	Rebuild a starter motor in 5 minutes.
3/8" Air Rachet	4.0 cfm	6.3 sec.	7.3 min.	11 min.	Change a belt or drop a drive shaft in half the time.
3" Cut-Off Wheel	5.0 cfm	5 sec.	5.8 min.	8.7 min.	For small emergency metal cuts.
1/4" Die Grinder	3.5 cfm	7.1 sec.	8.2 min.	12.3 min.	Clean metal before welding or open up a bolt hole.
3/8" Air Drill	5.0 cfm	5 sec.	5.8 min.	8.7 min.	You better have a sharp bit.

This chart will help you find the right bracket for your Power Tank system.